Data Creation in Local Exchange


Parameters: ND, NE, TY, CAT, NAP, CP

♦*ND: Directory Number

♦NE: Equipment no. in the form of UR-REG-BRO.

♦TY: Type of line. value V52 is mandatory.

♦CAT: Category of the line.

♦*NAP: Number of access port defined jointly in the LE and the AN.

The value is in the range from 0 to 8175 for ISDN lines and 0 to 32767

for analog lines.

♦*CP: CP to which the line is attached. (digital accesses only).

AT IDGAH OCB-283 VER R24

ND=3592000; TY=V52+KLA+SR1; CAT=IAI; AFUR=52; NAP=0

ND=3592001; TY=V52+KLA+SR1; CAT=IAI; AFUR=52; NAP=1

126 C-DOT AN-RAX

 

Appendix – A

Glossary

AN : Access Network

CAS : Channel Associated Signalling

CCS : Common Channel Signalling

CEPT : European Conference of Posts and Telecommunications

Administration

CP : Call Processing

DLE : Data Link Entity

DMA : Direct Memory Access

DTMF : Dual Tone Multi Frequency

FSM : Finite State Machine

HDLC : High level Data Link Control

LE : Local Exchange

LTE : Line Termination Equipment

MAX : Main Automatic Exchange

ARC : AN-RAX Controller Card

ARI : AN-RAX Interface Card

MDF : Main Distribution Frame

LCC/CCM/

CCB

: Subscriber Line Card

MMI : Man Machine Interface

PSU : Power Supply Unit

RTC : RAX Terminal Tester Card

PCM : Pulse Code Modulation

POTS : Plain Old Telephone Services

PSTN : Public Switched Telephone Network

AN-RAX : Access Network – RAX

RSU : Remote Switch Unit

V5 : Standard interface between LE and AN

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!